BMW E46 Splitters M3 - 0131S001

Вашата количка е празна.
Приятно пазаруване

Каталог

Реклама

HID.bg » CARBON Продукти » BMW » BMW E46 Carbon » BMW E46 Splitters M3 - 0131S001

BMW E46 Splitters M3 - 0131S001

Splitters for BMV M3 E46 front bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

It is very resistant despite of his light weight, one pair only 350 gr.

Very easy and quickly installation.

BMW E46 Splitters M3 - 0131S001

Splitters for BMV M3 E46 front bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

It is very resistant despite of his light weight, one pair only 350 gr.

Very easy and quickly installation.

Подобни Продукти

Пазарувай Онлайн

Гаранция на стоките

Гаранционният период за всяка стока е посочен в съответната за нея страница. Всички стоки, които подлежат на гаранционно обслужване, са придружени от необходимите документи с информация за срока, условията и мястото на гаранционното обслужване. Гаранционните уловия са съобразени с наредбите и изискванията на ЗЗП (Закон за защита на потребителите).

econt


Доставка за София в работно време: 9.00-18:30 - 3 лв

Доставка за София експресно за същия ден - 6 лв.

Доставка за цяла България - Еконт Експрес - 6 лв.

Доставка във фиксиран час +2.40 лв.

Плащане при доставка
При получаване на стоката плащате дължимата сума на куриера.

Плащане по банков път
Чрез банков превод в указаната от HID.bg сметка.

Онлайн плащане чрез EPAY.BG
Чрез банков превод в указаната от HID.bg сметка.

HID.bg

"Алвиа" ЕООД
София, ул. "Цар Иван Асен II" 60
тел.: 0888 795 001
e-mail: info@hid.bg

Работно време:
Понеделник до Петък 10 - 19 часа
Събота 10 - 14 часа
Неделя - почивен ден



Можете да закупите всички продукти на лизинг чрез TBI Credit.

Срока на лизинга е от 3 до 36 месеца.

Какво ново...

© Всички Права Запазени

уеб дизайн

BMW E46 Carbon Roof E46 Berlina - 0131T003

Carbon fiber roof for BMW E46 sedan without sunroof.
This piece is a sheet of 1 mm thickness made of carbon fiber to install on the origin roof. This piece is easily installed on the origin roof and the finish is really great because it is perfectly finish off all around.
In the front and rear parts, carbon is inserted under the rubber windscreen and on the sides, carbon is inserted under the side strips of the roof, thus we achieve a similar look to M3 CSL .
This piece is easily installed in approximately 3 to 4 hours, without special tools.
The kit includes adhesive and assembly instructions. 

1078.00 лв.

BMW E46 Door panels M3 CSL - 0131PP001

Door panels CSL made of carbon prepreg for BMW E46 Coupé.
This kit includes:
2 panels for the front doors
2 panels for the rear spaces.
Screws for installation.
4 brackets for the front carbon handles
(Front door handles not included) 
This kit is easily interchangeable with the origin BMW coupe panels; due to the basic structure of the panel is the same for the coupé and for ​​the CSL.
Obviously it is necessary to relocate the keypad which regulates electric mirrors. If the vehicle is equipped with airbags, you also need to remove this item, in which case we recommend going to a specialist centre and see potential problems by disassembling it.
Assembly guaranteed. Radical aesthetic. 

2401.00 лв.

BMW E46 M3 CSL Airbox- 0131AD002

CSL intake made of carbon fiber for BMW M3 E46.
This piece is a high quality replica of the well known M3 CSL intake. Produced in carbon prepeg fiber, the same material used in the manufacture of the origin part, with all the CNC machine-made items of aluminium, aluminium threads and stainless steel screws.
Integrated Power BMW sticker. His piece presents a perfect match between both sides due to a hermetic seal with a rubber gasket.
Trumpets manufactured in carbon fiber Extra smooth finish, for a perfect air circulation.
Reinforced at all key points, screws, connectors, etc..
Trumpets  produced in carbon fiber with an extra smooth finish, for a perfect air circulation. Reinforced in all key points, crews, connectors, etc. Relatively easy assemble due to you do not need to perforate or cut anything. You will simply have to disassemble the origin piece and assemble this one, although changing several origin parts is necessary.
With this piece you will obtain an amazing sound and a substantial power increase, depending on the parameters chosen for reprogramming.
Unique piece.

2940.00 лв.