CARBON Продукти за BMW

Carbon fiber bonnet for BMW E30 M3 and the rest of E30s

It is a high quality replica of the original E30 M3 bonnet, with all its moorings and reinforcements. Both inside and outside finish are in shiny carbon fiber.

This is a very resistant and light piece. With only 5 kilos, it allows a 10 kilos reduction regarding to the original part. Excellent outdoor resistance. Easy and quick assembly.

E30 M3 Evo Spoiler made of carbon fiber prepeg.

It is a replica of the successful M3 Sport Evolution spoiler

This piece is given ready to paint and with the adjustable spoiler finished in shiny carbon fiber

Easy and quick assembly.

Light and amazing aesthetic.

Air intake made of carbon fiber for BMW M3 E30. This piece is a high quality replica of the famous M3 air intake.

Manufactured in carbon fiber prepeg, the same material used in the original part, with all the machine-made items CNC in aluminium. “M power” sticker integrated.

Trumpets produced in carbon fiber with an extra smooth finish, for a perfect air circulation. Reinforced in all key points, crews, connectors, etc. Relatively easy assemble due to you do not need to perforate or cut anything. You will simply have to disassemble the origin piece and assemble this one.

With this piece you will obtain an amazing sound and a substantial power increase, depending on the parameters chosen for reprogramming.

Splitters for BMV M3 E46 front bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

It is very resistant despite of his light weight, one pair only 350 gr.

Very easy and quickly installation.

Splitters for coupé or sedan BMV E46 front bumper.

This piece has been specifically designed for its installation in the M2 bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

Very easy and quickly installation.

Splitters for BMV M3 E46 CLS front bumper.

Produced with shining finish prepreg carbon fiber.

High quality replica of the original splitters CLS.

Sport and forceful aspect.

This piece has been specifically designed for its installation in the M3 CLS bumper.

It is very resistant despite of his light weight, one pair only 300 gr.

Very easy and quickly installation.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg fibreglass; It is supplied with all moorings and holes you need for a perfect coupling in the origin bumper.

With this piece you will achieve an aspect similar to the CLS, with the advantage that you won’t need to change the rear bumper.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 1,150 gr.

This piece has a black shining finish.

Relatively easy to install, although it requires a modification in the exhaust pipe system, and in the inside part of the bump.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the original diffuser for pack M2 bumper.

This piece provides the car a more sport and elegant aspect.

It is very resistant despite of his light weight, only 750 gr.

In this piece, the carbon fiber is completely on display.

Very easy and quickly installation.

Engine cover made of prepeg fiber M3 E36. This piece replaces the original one. 

This is a high quality replica of the original part, both, the inside one and the outside one, which includes all the original moorings, what do it easy and quick to install. It has the letters in silver and embossed.

It support high temperatures and it has a good resistance to oil contact.

Low weight, high strength and sporty look.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the origin bumper.

With this piece you will achieve an aspect similar to the CLS, with the advantage that you won’t need to change the rear bumper.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

This piece has a carbon fiber finish.

Relatively easy to install, although it requires a modification in the exhaust pipe system, and in the inside part of the bump.

Central panel door ...

These are the 4 centre made of prepeg carbon fiber for the front panel doors and for the 2 rear holes for BMW E36 M3 coupe.

These parts must be swapped with the old centre panels that usually are upholstered and often sag.

It is easy to install although it requires removing the door trim. The kit includes four centre panels, glue and assembly instructions.

Shiny vanish finish but optionally in matt finish.

Central panel door E36 M3 cabrio. These are the 4 centre made of prepeg carbon fiber for the front panel doors and for the 2 rear holes for BMW E36 M3 coupe.

These parts must be swapped with the old centre panels that usually are upholstered and often sag.

It is easy to install although it requires removing the door trim. The kit includes four centre panels, glue and assembly instructions.

Shiny vanish finish but optionally in matt finish

Engine cover made of carbon fiber and aluStyle fiber for E36 M50 engine.

This kit includes 2 carbon fiber caps.

These pieces replace the original ones.

They are a high quality replicas of the original parts, both, the inside one and the outside one, which includes all the original moorings, what do it easy and quick to install. 

BMW aluStyle letters included. Reduced weight and impressive look.

Steering wheel with carbon prepeg fiber on the top and on the bottom. The rest of the wheel is upholstered to the client liking, who can choose in the following options:

Leather: smooth, drilled, “alcántara”, suede.

Seams: white, light blue, dark blue, black, red or tricolour

This item is only available upon request. The client must send us his steering to work with it. Once we receive this, the work will be finished in 10 or 15 days.

Moulds and airbags not included.

Diffuser for BMW M3 E46 rear bumper

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the diffuser popularized by the BMV M3 CLS.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

In it, the central part has a shined carbon finish, whereas the exterior one is treated with black paint. 

Very easy and quickly installation.

Diffuser for BMV M3 E46 rear bumper

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the diffuser popularized by the BMV M3 CLS.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

In this piece, the carbon fiber is completely on display.

Very easy and quickly installation.

Interior trim kit for BMW E46 sedan.

Pieces made of carbon prepeg fiber: These pieces are made from the original BMW ones, to ensure a perfect and quick assemble. This kit is shipped ready to install; you will only have to remove the original part and assemble the new kit instead.

The kit includes the following parts:

3 dashboard trims

2 front door mouldings

2 rear door mouldings

1 electric window moulding

kit composed of 8 trims for BMW E46 M3 coupe.

Pieces made of carbon prepeg fiber: These pieces are made from the original BMW ones, to ensure a perfect and quick assemble. This kit is shipped ready to install; you will only have to remove the original part and assemble the new kit instead.

The kit includes the following parts:

3 dashboard mouldings

2 front door handles

2 rear armrest

1 electric window moulding

 Front wing in carbon fiber for BMW E30 M3 and the rest of E30s. It is a high quality replica of the original E30 M3 wing, with all its moorings and reinforcements.

Intake (air induction  made of carbon fiber for BMW M3 E36. 

This piece is a high quality replica of the well-known M3 CLS airbox, but modified to install in the M3 E36 engine

Manufactured in carbon fiber prepeg, the same material used in the original part, with all the machine-made items CNC in aluminium, aluminium threads and stainless steel screws. 

This piece is ready to assemble with flowmeter, which does an easy assembled. “M power” sticker integrated.

His piece presents a perfect match between both sides due to a hermetic seal with a rubber gasket.

Trumpets  produced in carbon fiber with an extra smooth finish, for a perfect air circulation. Reinforced in all key points, crews, connectors, etc. Relatively easy assemble due to you do not need to perforate or cut anything. You will simply have to disassemble the origin piece and assemble this one, although changing several origin parts is necessary.

With this piece you will obtain an amazing sound and a substantial power increase, depending on the parameters chosen for reprogramming.

Unique piece