BMW E46 Splitters M2 - 0133S002

Вашата количка е празна.
Приятно пазаруване

Каталог

Реклама

HID.bg » CARBON Продукти » BMW » BMW E46 Carbon » BMW E46 Splitters M2 - 0133S002

BMW E46 Splitters M2 - 0133S002

Splitters for coupé or sedan BMV E46 front bumper.

This piece has been specifically designed for its installation in the M2 bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

Very easy and quickly installation.

BMW E46 Splitters M2 - 0133S002

Splitters for coupé or sedan BMV E46 front bumper.

This piece has been specifically designed for its installation in the M2 bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

Very easy and quickly installation.

Подобни Продукти

Пазарувай Онлайн

Гаранция на стоките

Гаранционният период за всяка стока е посочен в съответната за нея страница. Всички стоки, които подлежат на гаранционно обслужване, са придружени от необходимите документи с информация за срока, условията и мястото на гаранционното обслужване. Гаранционните уловия са съобразени с наредбите и изискванията на ЗЗП (Закон за защита на потребителите).

econt


Доставка за София в работно време: 9.00-18:30 - 3 лв

Доставка за София експресно за същия ден - 6 лв.

Доставка за цяла България - Еконт Експрес - 6 лв.

Доставка във фиксиран час +2.40 лв.

Плащане при доставка
При получаване на стоката плащате дължимата сума на куриера.

Плащане по банков път
Чрез банков превод в указаната от HID.bg сметка.

Онлайн плащане чрез EPAY.BG
Чрез банков превод в указаната от HID.bg сметка.

HID.bg

"Алвиа" ЕООД
София, ул. "Цар Иван Асен II" 60
тел.: 0888 795 001
e-mail: info@hid.bg

Работно време:
Понеделник до Петък 10 - 19 часа
Събота 10 - 14 часа
Неделя - почивен ден



Можете да закупите всички продукти на лизинг чрез TBI Credit.

Срока на лизинга е от 3 до 36 месеца.

Какво ново...

© Всички Права Запазени

уеб дизайн

BMW E46 Trim Bottom Wheel Sport - 0133MVI005

Bottom moulding for steering wheel BMW E46M Sport
Piece made of carbon fiber prepeg, based on the origin piece, to guarantee a perfect assemble.

206.00 лв.

BMW E46 Diffuser M3 CSL TOTAL CARBON - 0131D002

Diffuser for BMV M3 E46 rear bumper

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the diffuser popularized by the BMV M3 CLS.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

In this piece, the carbon fiber is completely on display.

Very easy and quickly installation.

774.00 лв.

BMW E46 Moulding Kit sedan - 0132KM002

Interior trim kit for BMW E46 sedan.

Pieces made of carbon prepeg fiber: These pieces are made from the original BMW ones, to ensure a perfect and quick assemble. This kit is shipped ready to install; you will only have to remove the original part and assemble the new kit instead.

The kit includes the following parts:

3 dashboard trims

2 front door mouldings

2 rear door mouldings

1 electric window moulding

1019.00 лв.