Splitters for BMV M3 E46 front bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

It is very resistant despite of his light weight, one pair only 350 gr.

Very easy and quickly installation.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the origin bumper.

With this piece you will achieve an aspect similar to the CLS, with the advantage that you won’t need to change the rear bumper.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

This piece has a carbon fiber finish.

Relatively easy to install, although it requires a modification in the exhaust pipe system, and in the inside part of the bump.

Interior trim kit for BMW E46 sedan.

Pieces made of carbon prepeg fiber: These pieces are made from the original BMW ones, to ensure a perfect and quick assemble. This kit is shipped ready to install; you will only have to remove the original part and assemble the new kit instead.

The kit includes the following parts:

3 dashboard trims

2 front door mouldings

2 rear door mouldings

1 electric window moulding