Splitters for coupé or sedan BMV E46 front bumper.

This piece has been specifically designed for its installation in the M2 bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

Very easy and quickly installation.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the origin bumper.

With this piece you will achieve an aspect similar to the CLS, with the advantage that you won’t need to change the rear bumper.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

This piece has a carbon fiber finish.

Relatively easy to install, although it requires a modification in the exhaust pipe system, and in the inside part of the bump.

Diffuser for BMV M3 E46 rear bumper

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the diffuser popularized by the BMV M3 CLS.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

In this piece, the carbon fiber is completely on display.

Very easy and quickly installation.