CARBON Продукти

Carbon fiber bonnet for BMW E30 M3 and the rest of E30s

It is a high quality replica of the original E30 M3 bonnet, with all its moorings and reinforcements. Both inside and outside finish are in shiny carbon fiber.

This is a very resistant and light piece. With only 5 kilos, it allows a 10 kilos reduction regarding to the original part. Excellent outdoor resistance. Easy and quick assembly.

E30 M3 Evo Spoiler made of carbon fiber prepeg.

It is a replica of the successful M3 Sport Evolution spoiler

This piece is given ready to paint and with the adjustable spoiler finished in shiny carbon fiber

Easy and quick assembly.

Light and amazing aesthetic.

Air intake made of carbon fiber for BMW M3 E30. This piece is a high quality replica of the famous M3 air intake.

Manufactured in carbon fiber prepeg, the same material used in the original part, with all the machine-made items CNC in aluminium. “M power” sticker integrated.

Trumpets produced in carbon fiber with an extra smooth finish, for a perfect air circulation. Reinforced in all key points, crews, connectors, etc. Relatively easy assemble due to you do not need to perforate or cut anything. You will simply have to disassemble the origin piece and assemble this one.

With this piece you will obtain an amazing sound and a substantial power increase, depending on the parameters chosen for reprogramming.

High quality replica of the original part.

Very shockproof and weatherresistance.

Set of 2 Fender Flares for the front spoiler of Escort Cosworth.

Parts made of carbon fiber.

Kit of 2 triangular mouldings for central console, located on each side of the ashtray. These parts are produced in carbon fiber prepreg and are easily interchangeable with the original plastic pieces.

Cover alternator for Ford Escort Cosworth.

Part made ​​of carbon fiber prepreg. 

Exact replica of the original part.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Cover alternator for Ford Escort Cosworth.

Part made ​​of carbon fiber prepreg. 

Exact replica of the original part.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Turbo cover for Ford Focus ST turbo.

Part made ​​of carbon fiber. 

High quality replica of the original part.

This piece is insulated on the inside with several layers of aluminum tape and optionally you can add a layer of asbestos insulation tape of 5mm.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Rocker cover for Ford Escort Cosworth.

Part made ​​of carbon fiber prepreg. 

High quality replica of the original part, it includes the Cosworth sticker embedded in the varnish.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Splitters for BMV M3 E46 front bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

It is very resistant despite of his light weight, one pair only 350 gr.

Very easy and quickly installation.

Rocker cover for Audi S2 Coupe 20V Turbo.

Part made ​​of carbon fiber, with the necessary holes for installation. 

Very easy and quick to install.

Highly resistant to temperature and 20V Turbo sticker included.

Gear lever buttons for Sierra Cosworth.

Part made ​​of carbon fiber.

Very light and strong.

Easy to install..

Splitters for coupé or sedan BMV E46 front bumper.

This piece has been specifically designed for its installation in the M2 bumper.

Produced with shining finish prepreg carbon fiber.

It includes screws you must screw on in the bottom of the bumper, and double-sided tape inside the frontal part for a better coupling.

This piece has a big bottom surface, which make easier the screwing. At the same time, this gives more contact surface between the piece and the bumper, which become in a bigger strength in the face of hits and tears.

Sport and forceful aspect.

Very easy and quickly installation.

Splitters for BMV M3 E46 CLS front bumper.

Produced with shining finish prepreg carbon fiber.

High quality replica of the original splitters CLS.

Sport and forceful aspect.

This piece has been specifically designed for its installation in the M3 CLS bumper.

It is very resistant despite of his light weight, one pair only 300 gr.

Very easy and quickly installation.

Distribution cover for Audi S2 Coupe.

Part made ​​of carbon fiber, high-quality replica of the original part, it has the necessary holes for installation. 

2 front door panels made of carbon for VW Golf I 3P.

Made of carbon fiber with a shiny finish and with all necessary holes for easy installation.

Cover for Ford Escort Cosworth distribution.

Part made ​​of carbon fiber prepreg. 

High quality replica of the original part, it includes the Cosworth sticker embedded in the varnish.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Mirrors for Sierra Cosworth type GR.A

Made of black shiny fiberglas finish, and synthetic mirror.

Specially designed for use in competition.

Centre console made of prepreg carbon fiber with matte finish for Focus ST.

This piece is only performed on request, as we need the customer's origin console to work on it. This way, we ensure that all moorings and supports are perfect.

We ship in 5 days after we receive the original part.

Cover for Ford Escort Cosworth distribution.

Part made ​​of carbon fiber prepreg. 

High quality replica of the original part, it includes the Cosworth sticker embedded in the varnish.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Distribution Cover Ford Sierra Cosworth.

Part made ​​of carbon fiber prepreg. 

High quality replica of the original part, it includes the Cosworth sticker embedded in the varnish.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Brake pump support for Evo VIII.

This piece is made ​​of 100% carbon fiber with a thickness of 5 mm and only 450 g of weight. Is a very strong and extremely light piece. 

Easy and quick installation.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg fibreglass; It is supplied with all moorings and holes you need for a perfect coupling in the origin bumper.

With this piece you will achieve an aspect similar to the CLS, with the advantage that you won’t need to change the rear bumper.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 1,150 gr.

This piece has a black shining finish.

Relatively easy to install, although it requires a modification in the exhaust pipe system, and in the inside part of the bump.

High quality replica of the original part.

Fast and easy assembly.

Front Lip Spoiler for Ford Escort Cosworth. Part manufactured by sandwich panel process of sandwich carbon fiber with synthetic core.

Very resistant and with the 3 scroll position holes.

Easy and quick to install.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the original diffuser for pack M2 bumper.

This piece provides the car a more sport and elegant aspect.

It is very resistant despite of his light weight, only 750 gr.

In this piece, the carbon fiber is completely on display.

Very easy and quickly installation.

Front grille for front bumper of Audi A3, A4. Part made ​​of carbon fiber prepreg with all the necessary moorings for installation.

High quality replica of original part.

Very shockproof and weather resistant.

Spoiler for Vw Golf I front bumper.

Made of carbon fiber prepreg, high quality replica of the original part.

Fit quick and easy assembly.

Air filter cover for Ford Sierra Cosworth GR.A.

Part made ​​of carbon fiber prepreg. 

This piece is a replica of the one used on GR.A Sierra Cosworth, which provides better airflow than the original cover.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Carbon Mirrors for Sierra Cosworth type GR.A

Made of shiny carbon fiber, and synthetic mirror.

Specially designed for use in competition.

Engine cover made of prepeg fiber M3 E36. This piece replaces the original one. 

This is a high quality replica of the original part, both, the inside one and the outside one, which includes all the original moorings, what do it easy and quick to install. It has the letters in silver and embossed.

It support high temperatures and it has a good resistance to oil contact.

Low weight, high strength and sporty look.

Front grille for Golf V R32 defense.

Part made ​​of carbon prepreg fiber with all the necessary moorings for installation. 

High quality replica of the original part.

Very shockproof and weather resistance.

Carbon Fiber Spoiler for front bumper Ford Escort Cosworth.

Part very strong, light and with a shiny varnish finished.

Easy and quick to install.

Diffuser for coupé or sedan BMV E46 rear bumper.

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the origin bumper.

With this piece you will achieve an aspect similar to the CLS, with the advantage that you won’t need to change the rear bumper.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

This piece has a carbon fiber finish.

Relatively easy to install, although it requires a modification in the exhaust pipe system, and in the inside part of the bump.

Central panel door ...

These are the 4 centre made of prepeg carbon fiber for the front panel doors and for the 2 rear holes for BMW E36 M3 coupe.

These parts must be swapped with the old centre panels that usually are upholstered and often sag.

It is easy to install although it requires removing the door trim. The kit includes four centre panels, glue and assembly instructions.

Shiny vanish finish but optionally in matt finish.

Central panel door E36 M3 cabrio. These are the 4 centre made of prepeg carbon fiber for the front panel doors and for the 2 rear holes for BMW E36 M3 coupe.

These parts must be swapped with the old centre panels that usually are upholstered and often sag.

It is easy to install although it requires removing the door trim. The kit includes four centre panels, glue and assembly instructions.

Shiny vanish finish but optionally in matt finish

Engine cover made of carbon fiber and aluStyle fiber for E36 M50 engine.

This kit includes 2 carbon fiber caps.

These pieces replace the original ones.

They are a high quality replicas of the original parts, both, the inside one and the outside one, which includes all the original moorings, what do it easy and quick to install. 

BMW aluStyle letters included. Reduced weight and impressive look.

Rear bumper diffuser for Audi A4.

Made of carbon fiber prepreg, with all moorings and holes for a perfect assembly in origin defense.

High quality replica of the original part. This piece gives it a more sporty and forceful look to the car.

Very strong with only 950 grams of weight. Shiny exterior finish 

Cover for Escort Cosworth turbo.

Part made ​​of carbon fiber prepreg. High quality replica of the original part, it has the waves and letters that you can be seen in the original.

This piece is insulated on the inside with several layers of aluminum tape and optionally you can add a layer of asbestos insulation tape of 5mm.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Turbo cover for Ford Sierra Cosworth. Part made ​​of carbon fiber prepreg.

High quality replica of the original part.

This piece is insulated on the inside with several layers of aluminum tape and optionally you can add a layer of asbestos insulation tape of 5mm.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Steering wheel with carbon prepeg fiber on the top and on the bottom. The rest of the wheel is upholstered to the client liking, who can choose in the following options:

Leather: smooth, drilled, “alcántara”, suede.

Seams: white, light blue, dark blue, black, red or tricolour

This item is only available upon request. The client must send us his steering to work with it. Once we receive this, the work will be finished in 10 or 15 days.

Moulds and airbags not included.

Backseat Cover Golf V R32, this piece is a cover to install on the back of the R32 seats.

Very easy installation, it is glued with double sided tape and hard under the skin so the finish seems OEM.

Diffuser for BMW M3 E46 rear bumper

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the diffuser popularized by the BMV M3 CLS.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

In it, the central part has a shined carbon finish, whereas the exterior one is treated with black paint. 

Very easy and quickly installation.

Interior moulding kit made of carbon fiber for VW Golf V 3P.

3 dash moulding

Two front doors mouldings

2 mouldings for ashtray and gears

This kit is only produced ​​under order due to the customer have to send their mouldings in advance to work on them. This way guarantees an excellent assembly.

Rear bumper diffuser for VW Golf V R32.

Made of carbon prepreg fiber, it is a high quality replica of the original part.

This piece is interchangeable with the original plastic piece; it has all the necessary fixings and holes for quick and easy installation.

Sporty look, shiny polish finish.

Diffuser for BMV M3 E46 rear bumper

Produced with prepreg carbon fiber; It is supplied with all moorings and holes you need for a perfect coupling in the bumper of origin. High quality replica of the diffuser popularized by the BMV M3 CLS.

This piece provides the car a more sport and forceful aspect.

It is very resistant despite of his light weight, only 850 gr.

In this piece, the carbon fiber is completely on display.

Very easy and quickly installation.

Interior moulding kit made of carbon fiber for Sirocco VW:

3 dash moulding

Two front doors mouldings

2 mouldings for ashtray and gears

This kit is only produced ​​under order due to the customer have to send their mouldings in advance to work on them. This way guarantees an excellent assembly.

2 front door panels made of carbon for VW Golf I 3P.

Made of carbon fiber with a shiny finish and with all necessary holes for easy installation.

2 front door panels made of carbon for VW Golf I 3P.

Made of carbon fiber with a shiny finish and with all necessary holes for easy installation.

Interior trim kit for BMW E46 sedan.

Pieces made of carbon prepeg fiber: These pieces are made from the original BMW ones, to ensure a perfect and quick assemble. This kit is shipped ready to install; you will only have to remove the original part and assemble the new kit instead.

The kit includes the following parts:

3 dashboard trims

2 front door mouldings

2 rear door mouldings

1 electric window moulding

Cover alternator for Ford Escort Cosworth.

Part made ​​of carbon fiber prepreg. 

Exact replica of the original part.

Shiny varnish finish and good heat resistance.

Fast and easy assembly.

Door panels made of carbon fiber for Sierra Cosworth.

These parts are intended to competition.

There are 2 simplified door panels but with the basic shape and the contour of the original parts.

Fast and easy assembly.

kit composed of 8 trims for BMW E46 M3 coupe.

Pieces made of carbon prepeg fiber: These pieces are made from the original BMW ones, to ensure a perfect and quick assemble. This kit is shipped ready to install; you will only have to remove the original part and assemble the new kit instead.

The kit includes the following parts:

3 dashboard mouldings

2 front door handles

2 rear armrest

1 electric window moulding

 Front wing in carbon fiber for BMW E30 M3 and the rest of E30s. It is a high quality replica of the original E30 M3 wing, with all its moorings and reinforcements.

Carbon fiber roof for VW Sirocco 

This piece is a sheet of 1.3 mm thickness made of carbon fiber to install on the origin roof. This piece is easily installed on the origin roof and the finish is really great because it is perfectly finish off all around. Impressive look.

This piece is made ​​from a mould of a Sirocco ceiling so that the adjustment is fully assured.

Spoiler for Mitsubishi Evo VIII made of carbon prepregfiber, although valid for Evo VI, VII, VIII and IX

Replica of the original piece, has the necessary fixings for installation. Very strong with minimal weight.

The wing is presented in shiny carbon in the top and in the bottom.

The pillars are presented in shiny carbon in the inside part and ready to paint in the outside. Impressive look.

Intake (air induction  made of carbon fiber for BMW M3 E36. 

This piece is a high quality replica of the well-known M3 CLS airbox, but modified to install in the M3 E36 engine

Manufactured in carbon fiber prepeg, the same material used in the original part, with all the machine-made items CNC in aluminium, aluminium threads and stainless steel screws. 

This piece is ready to assemble with flowmeter, which does an easy assembled. “M power” sticker integrated.

His piece presents a perfect match between both sides due to a hermetic seal with a rubber gasket.

Trumpets  produced in carbon fiber with an extra smooth finish, for a perfect air circulation. Reinforced in all key points, crews, connectors, etc. Relatively easy assemble due to you do not need to perforate or cut anything. You will simply have to disassemble the origin piece and assemble this one, although changing several origin parts is necessary.

With this piece you will obtain an amazing sound and a substantial power increase, depending on the parameters chosen for reprogramming.

Unique piece